Lincoln 770 AXL
ENGINE
- Cummins – Tier 4(i) 6 Cylinder Diesel Engine *
- Manual Telescope Hook Up
- 173 hp @ 2400 RPM
- 80-gallon fuel tank / 55 gal Hydraulic Oil Reservoir
- Manual Tow Bar and Side rack Adjusting Screws
- Bolt on Hydraulic Heat Exchanger (stationary)
ELEVATING CONVEYOR
- Conveyor start up warning alarm
- 60” wide throat
- 74” discharge height
- Heavy duty roller flight chain
- Heat treated flight wear edges
- Replaceable hardened floor liner
- Replaceable two-segment drive chain sprockets
- High carbon alloy cutting edges (adjustable)
- Heavy duty head and tail shafts with heavy duty bearings
- Reversible elevator to clear obstructions
REMIXING AUGER
- 14” diameter cast Ni-Hard replaceable segments
- Left and right-hand segments feed to the center for remixing
- Hydraulic motors coupled to auger shaft
- Forward/Reverse Control
PAVER ATTACHING ADAPTOR
SUSPENSION
- Four wheels have heavy duty caster assemblies
- Two 8.25 x 15-18 ply pneumatic rear tires
- Two 16.25 x 11.25 x 8 solid rubber front tires
- Swing up towing frame with pintle ring
- Rear casters pin for towing
CONTROLS
- Engine instrumentation (ground level)
- Hydraulic telescoping paver attachment (left-side)
- Auger on/Reverse – (Left side)
- Auger trough hydraulic lift (easy clean out) (left-side)
- Control panels on both sides of the machine include:
- Conveyor start up warning alarm
- Emergency Stop
- Engine increase/decrease
- Pump increase/decrease
- Cylinders up/down
HYDRAULIC DRIVE SYSTEM
Variable displacement pump is directly connected to the engines and drives two fixed displacement hydraulic motors with planetary gear boxes directly connected to conveyor head shaft.
Auxiliary mounted gear pump drives Quickie hook, lift cylinders, and auger lift
Piggy Back Pump drives remix auger and auger flight
55-gallon reservoir with large capacity heat exchanger.
HYDRAULIC LIFT SYSTEM
- High speed raise and lower to clear obstructions
- 10” clearance in up position
- Left and right height locking screws (manual)
DIMENSIONS
- Length (with wings folded in):17’-10”
- Height: 11’ – 8”
- Travel width: 8’ – 6”
- Rear Tire width outside of tread:7’ – 4”
- Front tire width outside tread: 8’ – 6”‘
- Operating width: 10’ – 0”
- Weight: 16,900 lbs.
Tier 4 Final Engine available as an option effective January 1, 2017.
Design and specifications subject to change without notice.
Download Spec Sheet