LINCOLN 550AXL Windrow Elevator

The Lincoln Windrow Elevator with our patented remixing auger provides a continuous flow of material that reblends asphalt just before entering the hopper eliminating segregation and ensuring a uniform mix temperature. Our unique product increases production and improves material handling reducing costs.

Download Spec Sheet
  • Cummins Tier 4(i) 4 Cylinder 140 hp Diesel Engine
  • Manual Telescope Hookup
  • Manual Tow Bar and Side Rack Adjusting Screws
  • 60 gal. Fuel Tank – 45 gal. Hydraulic Oil Reservoir
  • Bolt on Hydraulic Heat Exchanger (stationary)
  • Proven Reliable Design
  • Hydrostatic drive system
  • 47” wide – high capacity slat conveyor
  • 72” discharge height for full hopper load
  • High speed raise and lower
  • Rear wheel width designed for trailer loading
  • Hydraulic telescoping paver attachment eases hookup

Lincoln 550 AXL


  • QSB 4.5 4 Cylinder Tier 4(i) Diesel Engine
  • 140 hp @ 2400 RPM
  • 60-gallon Fuel Tank


  • Conveyor start up warning alarm
  • 60” wide throat
  • 72” discharge height
  • Heavy duty roller flight chain
  • Heat treated flight wear edges
  • Replaceable hardened floor liner
  • High carbon alloy cutting edges (adjustable)
  • Heavy duty head and tail shafts with heavy duty bearings
  • Reversible elevator to clear obstructions


  • 14” diameter cast Ni-Hard replaceable segments
  • Left and right-hand segments feed to the center for remixing
  • Hydraulic motors coupled to auger shaft
  • Forward/Reverse Control


  • Hydraulic telescoping paver attachment (Quickie Hook)
  • Adjustable up to 24” with hydraulic cylinder to position dump point
  • Fully extended to hook up paver then retract to operating position
  • Adapter fits most pavers


  • Four wheels have heavy duty caster assemblies
  • Two 8.25 x 15-18 ply pneumatic rear tires
  • Two 16.25 x 11.25 x 8 solid rubber front tires
  • Swing up towing frame with pintle ring


  • Engine instrumentation (ground level)
  • Hydraulic telescoping paver attachment (left-side)
  • Auger on/Reverse – (Left side)
  • Auger trough hydraulic lift (easy clean out) (left-side)
  • Control panels on both sides of the machine include:
  • Conveyor start up warning alarm
  • Emergency Stop
  • Engine increase/decrease
  • Pump increase/decrease
  • Cylinders up/down


  • Variable displacement pump is directly connected to the engines and drives two fixed displacement hydraulic motors with planetary gear boxes directly connected to conveyor head shaft.
  • Auxiliary mounted gear pump drives Quickie hook, lift cylinders, auger lift.
  • Piggy Back Pump drives remix auger and auger flights.
  • 45-gallon reservoir with large capacity heat exchanger.

    • High speed raise and lower to clear obstructions
    • 10” clearance in up position
    • Left and right height locking screws (manual)


    • Length (with wings folded in): 14’- 6”
    • Height: 9’ – 10.5”
    • Travel width: 7’ - 4”
    • Rear Tire width outside of tread: 6’ – 10”
    • Front tire width outside tread: 6’ – 10”
    • Operating width: 8’ – 11”
    • Weight: 13,500 lbs.

    Tier 4 Final Engine available as an option effective January 1, 2017

    Design and specifications subject to change without notice

    Download Spec Sheet